The foil winding machine is a professional equipment for coil inductors. PLC actively controls the variable -frequency -free speed regulating system software, optical hydraulic correction devices, and active welding distribution and other active manipulation functions. Ensure that the welding quality of the transformer is welded by the foil, and the loss of the transformer is significantly reduced. Let's take a look at the function of the foil winding mechanism.

1. Foil with roll machine equipment

Optical electric correction device: The correction device uses edge optoelectronics signals, and the electric servo motor is distributed to make the adjustment speed amplitude convenient. The equipment failure rate is low and the maintenance is convenient. Positive and rotating support is persistent. The size of the tension is given according to the resistor's rotation of the resistor or the touch display data. It can ensure that the foil winding machine coil is not loosened, there is no mechanical equipment, and other manufacturers are more common in mechanical equipment exclusion types and retreat without support.

2. Layer insulation layer roll machine equipment

The rotating support is persistent: composed of secret medicine, rolling and pressed facilities. With two layers of insulation layers, the secret medicine is used, and the secret medicine is used to use the bloating shaft. There is no slippery rail outside the human body. The supporting force of the layer insulation layer is completed by communication and AC frequency conversion motor caused by the reverse direction. The size of the tension is given according to the resistor's rotation. All the equipment and each secret medicine of the foil vending winding machine can be manually scheduled by the one person in the broad direction.

3. Welding machine equipment

The welding of the foil belt and wire is tig welding. The welding machine equipment is mainly composed of the following: clamping, welding machine promoting allocation, welding machine adjustment allocation, TIG welding machine, cooling water tank, etc. The clamping part is completed and closed by the pneumatic form. The welding machine can be scheduled back, left, left and right, and the welding machine welded and moved by the frequency conversion speed. All machines and equipment can reach or get rid of the welded area by motion (electric), and the welding platform can shake (manual) alone (manual), which is conducive to the foil belt, especially the thick foil, cross -clamping part and its adjustment of welding vision.

4. Remove the burrs equipment

Using ground foot bolts Roll axis and knead the edges of the foil with pneumatic scheduling work pressure. Practical experience proves that the efficacy is better than the V -shaped roller, which can ensure that the foil band edge has no capillary edges.

5. Cutting machines and equipment

It is composed of straight knives, garden cutting knives, guide systems and nails. The cylinder promotes the tightness of the foil nails, and the garden cutting knife moves under the motor to move along the straight rail, and then the low -voltage foil automatic winding machine foil is broken. All machines have good rigidity, and the orientation is accurate and then ensured relatively high tailoring quality.

6. Put the roll machine and equipment

The rolling motor is controlled by communication and AC motor, and the roll rate is switched by the button to switch the inferior operation according to the button. (Embeds imported resistors) can be used to the electromagnetic coil of the ring, square and square cross -section section. The roller is pushed by the cylinder to push the stuck or loosen.