The automatic winding machine can be coils of the coil electrocomputer various specifications of technical parameters, including peripheral coils and directional coils. On time, there will be some differences around the different coils. To set the basic parameters appropriately, adjust the support force and line loading methods, so that you can closely surround better crafts and better coil products. Together, there may be many problems during the operation of the automatic winding machine. The more common phenomena are shown below.

1. The coil line is tightly surrounded by unevenness. When presenting this situation, the need to analyze the problem should be presented in the normal processing process, or it is presented after the product demolition and adjustment. In the previous situation, most of the situation is caused by hardware issues, and in the later situation, it is generally design defects. The hardware problem may be due to the loosening of the tooling fixture, the fixed nuts of the wiring tissue, and the lack of the smooth ecological environment of the wiring tissue that leads to the operation of the communication servo motor band load.

2. The stop position of the motor rotor is not very accurate, and you are not actively actively around the rim. This situation is generally caused by the braking problem. For example, loose brake pads may damage black brake pads. In addition, there is a very large connection with the settings of the brake board at all times. If every time is not good every moment, the main axis positioning will be incorrect. To solve this problem, you need to replace the brake pads and re -adjust the brake system every moment.

3. The coil of the winding machine is strictly prohibited. Perhaps the number of winding machines is different. Generally, the sensor or the controller may be difficult, which makes the winding machine cannot operate normally and requires the maintenance of the winding machine manufacturer.

4. An abnormal noise appears during the operation of the automatic winding machine. The difference between the sound of sound is used to identify whether there are abnormal difficulties in the winding machine. Of course, this demand is better identified.

During the operation of the automatic winding machine, the body can be close to the rotating prefabricated component after the operation winding machine. If the demand is adjusted, the demand will stop the operation of the device at the beginning. Regulating must ensure your safety. From scratch. In addition, the operator should not wear gloves, sleeves and long hair. If an abnormal sound of the winding machine is released, the demand will temporarily stop the operation process and find professional technical maintenance.