The main axis system for the servo control system can greatly improve the winding reliability of the equipment in the spindle system, instead of traditional DC brushless motors and electromagnetic speed regulating motors. The advantages of using servo motors are obvious. Realize the precise positioning of the main shaft bearing and meet the locking regulations. The indoor space application is saved in the compact winding device, which helps the device's heat exclusion.

The coil winding processing process is not only the processing process of the roll, but also the accurate and orderly line posture of the winding equipment. Generally, the winding equipment generally uses a servo motor to promote the offset roller screw to complete the lines, because the servo motor The use of the ring -opening system, which seriously affects the precision of the line lines. Applying the servo control system can improve the precision of the lines to achieve the fast line position and reduce the operating noise of the winding machine equipment.

Regardless of the operation of the winding machine at a low -speed or maximum speed, the servo motor will operate steadily, and the torque is small. Especially at ultra -low speed, it should still have a stable rate without shaking. The servo motor should be able to withstand frequent operation, braking system and flipping. The servo motor should have a large load capacity for a long time to meet the needs of low -speed gear and large rotation. The general DC power servo motor used in some special rough winding machines is stipulated in a few minutes. Essence In order to meet the rapid response of the winding machine control system, the servo motor should have a relatively small inertial torque and a larger turbida distance, and have as small as possible and the power supply voltage as much as possible. In order to ensure that the servo motor is stopped from running to the rated speed in 1 second.