One of the common faults of the winding machine is a common failure. The winding of the winding machine must be turned off immediately, and then the maintenance and maintenance must be detected. Averse crystal three -dimensional high and low pressure integrated machine, foil winding machine

First, let's see if the winding machine is broken, it has an impact. When the winding failure is generated in the winding machine, it is called a winding road broken, which is also the phenomenon of the internal structure of the motor. When a winding machine is broken, the motor will have a series of faults. There will often be unstable idle speed, uneven three -phase current, abnormal vibrations, severe heating more than the category of controlling the controllability, smoke, and burn of winding machines.

(1) Reasons for formation

The reasons for the formation of the winding of the winding machine are mainly included, and the route is pulled off during maintenance; the processing process is difficult; the welding welding of each component line of the winding machine is not good, and the ultra -temperature is welded; the winding machine is destroyed by the external force; Short -circuit faults and grounding devices cause damage.

(2) Detection method

1. Observe. The most often position of the interrupt point is generally at the end of the winding machine. You can estimate whether the two ends of the winding winder can be welded.

2. Digital multimeter or ground shaking meter measurement method. The end of each phase winding machine is measured, and the infinite phase is a disconnection.

3. Plug -in measurement method. When the motor is running normally, the three -phase current is accurately measured by the clamping current meter. If the three -phase current is blocked, and the short -circuit failure can be filtered, the minimum current winding machine has a disconnection failure.

(3) Solve the maintenance method

1. When the disconnection is at the top, it will be welded again after the connection.

2. The internal structure winding machine breaks the road. This kind of situation is generally impossible to repair.