The winding machine is a device used to make electronic components to carry out windows or cables. It is generally used to manufacture electronic devices such as transformer, inductance, inductor, and power. , Often occur in the problem of sagging of the winding, which prompts the electromagnetic coil loose and causes any problems.

1. Adjust the fixture

1. The compression amplitude of the fixture: The clamping force of the fixture or too tight may affect the inductance, tension, and relative density of the coil coil. Therefore, the appropriate fixture should be selected according to the differences of the winding material, and the appropriate fixture should be used, and in use, it should be used in use. Adjust the tightness of the fixture to ensure the balance and sufficient catering of the line.

2. The installation and adjustment of the fixture: Generally speaking, the installation location and direction perspective of the fixture will affect the tightness of the electromagnetic coil of the winding machine equipment. For different winding pores and winding perspectives, it is necessary to determine whether the fixture is closed and strictly. Make sure the winding is stable.

2. Choose the material axis that suits you

1. Material shaft selection: The material axis is a winding support, and the tightness of the winding is also very harmful. Therefore, in the case of selecting the material axis, it is necessary to properly match the specifications of the equipment specifications of the winding machine equipment. The gap between the diameter of the shaft pore and the nominal diameter of the winding machine.

2. Is the material axis fixed: During the winding of the winding machine, the fixing of the material axis also affects the tightness of the winding. Therefore, when using the material axis, it is necessary to determine whether the material axis is fixed. The level of fixation is enough.

Third, adjust line tension

1. Adjust the line tension equipment: The internal line tension equipment of the winding machine can adjust the tightness of the winding of the winding, which is always loose to deal with the winding of the winding machine. Adjust the tension of the server's device and assist the equipment to maintain the close coil.

2. Line tension settings: According to the differences of winding materials, different line tension must be developed. If the tension is set too high, it may cause the strain force to loosen; if the tension is set too small, it may cause the cable bumps to bump and convex Unhealthy and unreasonable fitness exercise.

There are many reasons for the winding machine winding machine. It can be processed from many aspects such as adjusting fixture, choosing the material axis and adjusting the tension of the line. The difficulty coefficient of the maintenance of the maintenance of them is suitable for adjusting and clearing abnormalities. Through the above methods, it can fundamentally solve the problem of loose winding winding machine winding, ensuring the stability and quality of the winding.