The winding machine is an electrical device that consists of an automatic control system and metal material and some accessories. They all have their own use. Generally, metal materials accounted for 60 % of the winding machine, and its necessity was very large. Averse crystal three -dimensional high and low pressure integrated machine, foil winding machine

The characteristics and use characteristics of the processing process are two major characteristics of metal materials. Generally, the production of winding machines pays more attention to the grinding processing characteristics of metal materials. The application characteristics are shown in the practice application link. It depends on the scope and period of use of the machine.

The selection of metal materials generally uses processability and actual performance indicators as an important basis. Natural load properties are different from the standard standards for metal materials. Common winding machines are selected from electrical winding machines. Generally, the raw iron structure, the general small and medium -sized winding machines are aluminum pouring, and small and medium -sized winding machines are generally welded in building steel.

The pressure resistance generally refers to the resistance of metal materials under the influence of quiet loads; plasticity means that the metal material is under the influence of the load, causing plastic deformation and not destroying the ability. Steel, 45 steel, etc. are the differences in strength of the strength; fatigue is a working metal material under the load load of the circular system, and a kind of indicator transformation produced.