How to deal with the short circuit of the coil winding machine, let's talk about it!

The electromagnetic coil winding machine, the winding machine refers to the machine and equipment around the special product workpiece from the strip -shaped object disk to the special product workpiece. In the common faults that may occur in the winding machine, the short circuit of the winding machine is still a common phenomenon. Why is there such a short -circuit and how to solve it? A amorphous three -dimensional rolling iron heart, non -crystal three -dimensional high and low pressure integrated machine

1.

The important reasons for the direction of the winding machine include: the route is torn during maintenance; the processing process is difficult; the welding welding welding of the line end of the winding mechanism is not good, and the ultra -temperature opening is welded; the winding machine is destroyed by the external force; , Cause damage, etc.

2. Inspection method

(1) Observation method. The position of the interrupt point is usually at the end of the winding machine. Be visually checking whether the welding on both sides of the winding machine is welded.

(2) Digital multimeter or vibration platform measurement method. Each accurately measures the head and tail end of each phase winding machine, and the endless phase is an attractive phase.

Start the test method. When the motor runs normally, the three -phase current is measured with a plie -shaped current meter. If the three -phase current is uneven, the short -circuit common faults can be removed.

3. Harmony and maintenance method

(1). After the way to the end, after the connection, welding again, wrapped in moderate cable condoms, dry three anti -paint drying, and then wrap the insulating tube application.

(2). The internal structure winding machine is short -circuit. Such things cannot be repaired. To change the electromagnetic coil.

All in all, the key to the maintenance of the winding machine is to find out the fault phenomenon and location as soon as possible according to the failure problem. This fault exclusion method does not have strict boundaries in practical applications. Sometimes a method must be used to remove common faults. There may be multiple ways to do with this.