The so -called winding machine function program test standard is the consistency of the compilation program winding machine CNC machine tool and the unique function of the key, such as adjusting zero. Perspective. Precise positioning. Positive and negative. Setting. Fixed cycle time. Customer macro program. Written or CNC programming software to enter the functional test code according to manual program, and then run the operating function test code of CNC machine tools. Averse crystal three -dimensional rolling iron, foil winding machine

This functional process process can be used to check the accuracy and stability of this function implemented by the winding machine, and then quickly distinguish which function that is comprehensive is not very good, and then distinguish the fault. This method is difficult to clarify that the program writing or the operation is incorrect. Because the CNC machine tool winding equipment lacks daily maintenance long -term idle for a long time, it is not necessary to check it at a time. It is a stronger way to distinguish the common failure of the winding equipment. In addition, the functional test code can continue to operate several times to confirm the reliability of all the software of the system software.

The CNC machine tool of the fully automatic winding machine mainly uses modularity, and is divided into different types of control modules for different functions. With the rapid development of contemporary CNC processing technology, the scale of circuit integration is particularly large, and the processing technology has become more and more complicated. According to traditional methods, common faults cannot be accurately located in locality. Once the system software is abnormal, this method can reduce shutdown time and quickly find the principle of common fault trigger.

After selecting an automatic winding machine, many users do not master the setting and use of the winding machine. Our own technical engineers bring you the following professional skills for your reference.

First, everyone must understand the types and characteristics of the transmission line in depth. Circuit turning. Skeleton appearance. Materials and winding rates.

1. For example, for the self -adhesive line and wire bag, because the surface layer is not too smooth and there is no inertial force characteristics, the setting of the wire pores should be greatly increased.

2. The angle speed of the filament is not suitable for too slow, but in order to prevent disconnection, it must be lifted slowly.

3. The speed of thick stainless steel wire should not be too fast (speeding), but you must pay attention to whether the low -speed torque is abundant.

4. When applying an aluminum cable, it is necessary to pay attention to adjusting the support to much less support for the support of the same thin copper heart line, so as to prevent the cable line diameter smaller and the outer three -proof paint cracks, which will affect the quality of the product.

5. When applying aluminum cables, because the support is reduced, the setting of the cable wire is improved as much as possible. Combining your own expansion requirements, the total number of wire wheels can be reduced.

Second, the shape of the skeleton has a lot to do with the height of the rower and the distance between the group.

1. The speed of the square skeleton should not be too fast, and there will be an uneven ring protrusion in the middle, which will endure the sorting of the transmission line.

2. The height of the seedlings, architecture and cable arranges is as possible. If the wires are too low, it is very easy to fall into the next floor. If the distribution line is too high, there will be leakage.

3. The group spacing between the cable construction machine and the skeleton can not be too far, which will affect the precision of the cable boring.

4. The tightness of the row machine is also related to the winding and the lines.

3. Set the matters that the fully automatic winding machine needs to pay attention to.

1. First correct the width and starting point of the skeleton, which is indispensable.

2. At the beginning of the starting point, the line gradually wrapped. Stop on both sides to detect the total width of the setting set.