Many professional capabilities in China have made a corresponding deep discussion on the level of controlling the management system of the winding machine. The overall planning of a constant tension winding mechanism based on the vector material variable frequency professional skills is planned. The process standards surrounded by the transmission line, the high accuracy of the control of the transmission line around tension; in 2010, closely focused on the processing process of non -continuous amorphous belt winding processing process, and the tension control, the cloth strips were actively continuous and actively school during the winding process. Important professional skills such as inspection have entered a deep -level analysis and discussion. The overall planning has a fuzzy PID controller, and the surround of non -continuous amorphous band is completed; in 2011, a set of active winding of ARM CPLD as the key to control was planned. The wire control management system, and proposed a set of effective tension control plans to control the constant tension surrounding the transmission line; in 2014 Select the tension control plan for digital amplifier machine equipment, and the test center applies to the feedback signal of the weight sensor to collect control control circuits. The system reflects and suppresss regular sexual assault caused by the winding process. It also conducted the role of the control plan pointed out by the surrounding experiment; in 2016, the professional skills of the self -Anti -Anti -Anti -control (ADRC) were applied to clearly propose a new method of tension control that does not rely on the actual winding physical model, and according to simulation and simulation and simulation and simulation and simulation and simulation Experiments verify the internal structure of the planned tension controller scalability and anti -invasion. However, the active presence of the current solid layer insulation belt and the top insulation belt at the top. There are almost no references such as tension control and other levels of tension control when rectangular coil winding. The surrounding of the solid layer insulation belt and the top insulation belt is part of the consumption time and low effect of the construction time during the degeneration of the transformer. With the band, its essential condition is the line row, putting the machine and equipment and tension manipulation in the middle of the mutual cooperation. Therefore, the development of the rectangular coil can not only be applied to the winding line, end insulation layer, and layer insulation, which can be surrounded. The winding machine control management system is of great significance. Averse crystal three -dimensional high and low pressure integrated machine, foil winding machine

Although the occurrence of a fully automatic winding machine, although some disadvantages of the production of semi -active winding machines are processed, the current positive line rowing machine is provided for single -cable shestors. Surrounding, low level of active level, incomplete processing process and the insulation layer of the insulation layer of the inductive coil of production. For this problem, if you can analyze the work content of the full active winding machine of the transformer, the overall mechanical and equipment plan of the overall planning of the overall planning machine will be very suitable.