What is the harm of the foil winding machine load? The company not only needs to innovate in the implementation of production design plans, marketing forms, and system software management. But sometimes, the innovation can be changed. For example, it is like a problem. It is not for innovation, but also to solve. A amorphous three -dimensional high and low pressure integrated machine

When the load current of the foil winding machine is added, the copper damage of the winding coil will be added, so the temperature of the stator winding electromagnetic coil and the stator iron heart will increase. When running normally, the load current of the foil winding machine should not exceed the rated current in the departure signboard. When the temperature rises or decreases, the load current will be expanded or reduced accordingly.

If the load current is increased, the three -phase current balance should also be detected. Generally, after a large value of the two -phase current does not exceed the rated value, the instability of each phase current should not exceed 10 minutes. If the distance is relatively large, the stator winding may occur in short -circuit faults, leading, connecting against or motor single -phase power operation. Park at this moment, find the reason for the reason to remove the problem before using it.

In the control system of large -space foil winding machines, a current meter is generally installed and its current is detected in time. A relatively small foil automatic winding machine is generally not equipped with a current meter, but it must also be accurately measured with a clamp -shaped current meter for a long time.