The automatic winding machine contains electrical equipment and mechanical structures. If the operator is wrong, it will bring himself a personal danger. 

Therefore, training must be carried out before operation. During the production process, the operator must operate in a formal manner. Before the operation, you 

should carefully read the additional indication, understand the operation method, follow the operation steps, and avoid the destruction of the automatic winding 

machine by the automatic winding machine, leading to a production accident. The following belongs to the operator's order to ban personal behavior:

1. When the fully automatic asset machine runs at high speed, it is forbidden to touch the fitness motion component. The speed of the lathe equipment of the fully automatic 

wire machine is generally thousands of rotations per minute. The starting speed of the main bearing of some automatic winding machines can reach more than 10,000 to 10,000 per minute. 

high. The touch that will not be guaranteed will also cause an unpredictable price.

2. No non -machine equipment maintenance engineer disassembles all components in the automatic winding machine. The loosening of mechanical parts will make the fully automatic 

winding money machine without stable work, resulting in a low rate of good products. In severe cases, it may even cause an electric shock accident or even a fire.

3. The device must be applied strictly according to the operation steps of the automatic winding machine. When pulling and loading and unloading and handling framework 

positioning device, power should be disconnected as much as possible.

4. Installation of the workpiece fixture should be tightened to tighten the screws, and the fixation of the mold thimble is fixed to avoid loosening; when installing the framework, 

it is guaranteed to cooperate with each other in a timely manner. When putting the line, ensure that the wires are not easy to affect the subsequent winding posture.