DETAILS
Core and coil assembly table Main technical parameters
Model | TFJ-3 | TFJ-5 | TFJ-10 |
Max.weight of core | 3 tons | 5 tons | 10 tons |
Working height | 850mm | 1000mm | 1200mm |
Applicable core size | Length:1500mm Width:1500mm | Length:2000mm Width:2000mm | Length:2500mm Width:2500mm |
Table overturn angle | 0-90 degree | 0-90 degree | 0-90 degree |
Table overturn time | 80 s | 80 s | 80 s |
Distance between columns | adjustable | adjustable | adjustable |
Driven method | Hydraulic pressure | Hydraulic pressure | Hydraulic pressure |
Power supply | 380V,50HZ (can make for customer site) | ||
Features:
· plane stacking can realize accurate positioning of stacking.
· the working table can be overturned 0-90 degrees and can be stopped at any optional position. the table always keeps stable status
when the center of gravity suddenly changed from one side to another in the process of overturning.
· The machine has a device that can protect the core avoiding dumping in the process of overturning,
· Stable rising and going down of the machine.
Functional features
1) The core piling overturning table is a special device with advanced level in similar products at home and abroad for piling and overturning
1) The core piling overturning table is a special device with advanced level in similar products at home and abroad for piling and overturning
of large and superlarge transformer cores modified, designed, and produced by combining with actual conditions of the transformer industry in
China according to technical drawings of foreign special devices.
2) All components must be guaranteed with sufficient strength and rigidity and guarantee no distortion during overturning and the reliability of work.
3) Main components are obtained through machining, guaranteeing the flatness tolerance of the upper plane of the piling platform.
4) Necessary heat treatment and non-destructive inspection are done in components involving lifting and the non-destructive inspection report
are provided, guaranteeing the safety of workers.
5) No special pit is required. Only two positioning slots are arranged on the ground for positioning during use and assembly. After use,
components of the overturning table can be disassembled and lifted with not occupying the working space.
