DETAILS
When the roll is heated:
1.Automatic Heating:
Turn on the temperature controller, rotate the rotary knob, until come to the technology required scale position(pay attention: this numerical
value is the heated temperature you set ). The scale on the temperature controller is the actual temperature. When heated, Green light(ON)
will turn on, Red light (OFF) will turn off, arrive to the set point, Green light (ON) will turn off, Red light (OFF) will turn on. Turn the button on
the boot left side to OFF.
2.ManualHeating
Press the button of the temperature controller to the “0” then the light “ON”will turn off, light “OFF” will turn. Put the button on the boot of the
machine to “ON”. Temperature controller ON OFF will both turn off.
Press the button on the left middle Quartz Tube, the green light on the left side will turn o. Pay attention: Now the machine is handle heated,
this application need worker observe the control, pay attention to the temperature.
3.According to the paper’s thickness and the corrugated paper’s depth, adjust the roll’s gap.Through adjust the screw on the left and right,
turn left or right the hand shank, when the gap come to the requirement, lock the lower handles, finished the gap debugging. Use a 200×200
paper as the model try to pressing, up to standard then it can use. If the paper turn to one side off tracking, the it show the roll gap on the side
is too high, need to be adjusted.
Corrugated roller diameter | Φ185mm |
Corrugated roller length | 1200mm |
Corrugated roller working temperature | 120-180℃ |
Motor power | 2.2KW |
Electric Heating tube specification | 2*3 |
Processing board width | 1200mm |
Processing board thickness | 0.5-3mm |
Shape forming speed | 4m/min |
Machine dimension | 1750*700*1350mm |
